- Home
- »
- Our Products
- »
- Dust Suppression System
Dust Suppression System
Dry Fog Canon
Minimum Order Quantity: 1 Piece
Product Brochure
Usage | Dust Suppression, Odor Control, Evaporation |
Type | Touch Screen Operated |
Automation Grade | Fully Automatic |
Power Consumption | 25 HP |
Material | Steel |
Color | Blue |
Model Name/ Number | OSFC50 |
Brand | Oasis |
Height | 8 Feet |
Power | 25 HP |
Internal Pressure Bar | 10 Bar |
Fan Material | PWG |
We are offering of Dry Fog Canon.
Fog Cannon System is available with following standard features:
- Equipped with nozzles with manual regulation of water-mist according to the requirement as per site airborne dust conditions
- The Nozzles are made of Brass and it can be easily removed and cleaned within short time by using simple tools.
- All the nozzles shall be of same size to generate equal mist particles from each nozzle for uniform spraying.
- A High Pressure Booster Pump Set - 3 Phase 50 Cycle shall be integrated with the machine to develop adequate pressure at the nozzles.
- It comes with Electrical Cable of 25 mts. long.
- Arrangement for drainage of water from the entire system by single plug..
- Double Filtration System to avoid choking of nozzles, (a) Hydro-cyclone Filter followed by Screen / Disc Filter.
- The noise of the System is within prescribed limit.
- The machine frame and all metal parts including the cone shall be duly Powder Coated.
- The size of water molecule in the mist shall arrest dust particle of maximum size of 40 micron.
- It shall also have Earth Leakage Protection (30mA)
- Hooks shall be there for lifting of the unit.
The following additional features may also be added with standard Fog Cannon System, if required:
- Facility of auto oscillation approx. 0 - 300° with Hand Held Controller / Wireless Remote Control System with a provision to set the degree of rotation as per site requirement
- Facility of auto vertical tilting approx. 0 - 45° for spraying at 15 - 20 mts. height.
- Facility to operate the System by Remote Control / Hand Held Control or Control Panel on machine.
- Phase Inverter along with Indicator and Phase Change-over with Protector.
- Pressure Gauge and Flow Meter to measure the pressure developed at nozzle-end and for actual measurement of flow of water per hour, respectively.
- 3 nos. Tyre Mounted Trolley (not Jockey type) with provision for towing and Stabilization bars for adjusting the height of the Trolley as well as for balancing.
- Hour Meter for reading actual hours of running.
- Device for locking of Cone tilting.
- Circuit Breaker Protection for the Drives of Fan, Oscillation, Tilting and Water Pump.
- Dry Run Protector to trip the system in absence of water.
Additional Information:
- Item Code: OSFC30
- Production Capacity: 12
- Delivery Time: Ready Stock else 4 weeks from date of order
- Packaging Details: “OASIS” make Model No. OSFC/030, Suitable to throw 30m IN NO WIND CONDITION Radial Throw– 30m. IN NO WIND CONDITION; Type of Control –ON / OFF / EMERGENCY STOP / Oscillation–Through HMI-PLC based control System “DELTA” make; Water Discharge : 45 - 60 LPM or as per the recommendation of End User; Blower Motor : 10 H.P., 4 Pole, 415 V, 3 Ph., 50 Hz., AC Supply, Insulation – Class F, Induction Motor (TEFC Cage), Foot Mounted; Water Pump : Flow 33 – 133 LPM at Discharge Pressure : 5.5 – 14.7 kg/cm², In-line Vertical Type, 4.0 H.P., 2 Pole, 3Phase, 50Hz, 415V ±10%; IP-55, F-Class insulation; Type of Mounting – Fixed on MS Base Frame along-with stabilization bars.Manual 3 point jacks for anchoring the unit at site while in operation. Hooks provided to lift the Unit. Horizontal Oscillation: up to 270º, controlled by a brushless, synchronous electric motor that can divide a full rotation into an expansive number of steps; Vertical Rotation : up to 40⁰ controlled by electrically operated actuator; MOC for Nozzle : S.S.-304; MOC for Nozzle Manifold : S.S.-304; Housing shall be as per IS : 2062 Gr-A and Finsshall be as IS : 617, Desig. 4600, which produce lower sound level; Water Droplet Size : 30µm to 180µm (max.); Panel Protection : as per IP-55; Electrical Switch Gears like Overload Relay, On-Off Push Button, R/L, Up/Dn Push Button, Indication Lamp L&T / Siemens make, Starter (DOL / Star-delta) – L&T / Siemens make; Motor : “Crompton” / “Kirloskar” / “Marathon” / “Bharat Bijlee” / “ABB” / “Siemens” / “Havels”or equivalent reputed make; Pump : “Kirloskar” / “CRI” / “Crompton” / “KSB” / “SULZER” / “M&P” or equivalent reputed make. Pump M.O.C. :Drainage Plug Assembly, Primary diffuser, Diffuser with bearing, Impeller, Final diffuser, Vent plug assemblyand Pump Shaft made of Stainless Steel, Suitable for pH value 5 – 9.. Base Plate, Motor Base and Pump Casing (Suc& Del) made of Cast Iron; Other features : Filter with Pr. Gauge at inlet and outlet; Electro-mecha
Industrial Dust Suppression System
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Stainless Steel |
Color | Gray |
Usage/Application | Dust Suppression |
Automation Grade | Fully Automatic |
Power | 50HP |
Power Supply | Electric |
Voltage | 440VAC |
Volume | 500LPM |
Our Industrial Dust Suppression System, mist dust suppression system and dry fog dust suppression system are utilised clean atmosphere by eradicating the dust particles. This is done when atomizing nozzles, fitted in a series, form a pattern similar to hollow cone spray. The specific operation mode enables operators to use the systems in an efficient manner.The fine mist droplets produced by our systems float freely in the air and create fog. Then, the fine spray pattern completely covers the particular area; due to which, dust falls down after getting heavier. Depending on nozzle capacity and pressure, the spray pattern is affected by air frictions and currents several feet away from the nozzle. This ensures no particulate matter on the particular area.
Additional Information:
- Delivery Time: Ready Stock
Stockpile Dust Suppression Systems
Minimum Order Quantity: 1 Piece
Product Brochure
Power Consumption | 50HP |
Material | Steel |
Color | Gray |
Usage/Application | Dust Suppression |
Type | Sprinkler |
Automation Grade | Fully Automatic |
Material Feature | Dust Suppression |
Water Pressure | 5kg/cm2 |
Stockpile Dust Suppression (2" BSp)
Additional Information:
- Delivery Time: Ready Stock
Dry Fog Systems
Minimum Order Quantity: 1 Piece
Product Brochure
Voltage | 440VAC |
Power Consumption | 10HP |
Material | Mild Steel |
Color | Blue |
Automatic Grade | Automatic |
Dimension L W H | 40*18*16 cm |
Particle Size | 5-150 Microns |
Air pressure | 3 |
Additional Information:
- Delivery Time: Ready Stock
Equivalent Sprinkler ES65PC
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Stainless Steel |
Color | Steel |
Usage | Dust Suppression |
Brand | Oasis |
Online Shopping | NO |
Condition | Auto Swivelling |
Trajectory angle | 43 |
Standard Nozzle Size | 22mm. Also available with 24 / 26 / 28mm Nozzle size |
Connection size | 2.5" BSP Male / Female |
Ø Trajectory angle 43°
Ø Body made of SS / Aluminium Alloy Casting
Ø Swing Arm made of SS / WCB
Ø Tube Bearing System made of SS
Ø Nozzle made of Steel
Ø Standard Nozzle Size 22mm. Also available with 24 / 26 / 28mm Nozzle size.
Ø Connection size 2.5" BSP Male / Female
Ø Also available in Flanged Connection of 2.5” size
Ø Part / Full Circle Operation arrangement
Ø Highly suitable for spraying water on heap as high as 18 mtrs
Additional Information:
- Delivery Time: Ready Stock
Water Spray Nozzle
Minimum Order Quantity: 10 Piece
Product Brochure
Nozzle Size | 1/4 inch |
Design | Dust Suppression |
Material | Brass |
Pressure | 3-6 bar |
Working Pressure | 4-6kg/cm2 |
Orifice Diameter | 0.5-1 mm |
Type | Thread Type |
Thread Size | 1/4 |
Brand | Oasis |
Color | Steel |
Customisation | Not Customised |
Weight | 500gm |
Surface Treatment | Nil |
Packaging Type | Box |
Technique | CNC |
Tolerance | 0.5mm |
Size Of Whole | 3"X3" |
Spray Angle | 30-60 Degree |
Usage/Application | Dust Suppression |
Additional Information:
- Item Code: ODSD
- Production Capacity: 100
- Delivery Time: Ready Stock
Dry Fogger System
Minimum Order Quantity: 5 Piece
Product Brochure
Usage/Application | Dust Suppression |
Air Pressure | 4-5 kg/cm2 |
Air Volume | 300-330 LPM |
Size | 40*16*18 cm |
Water Pressure | 1-3 kg/cm2 |
Water Volume | 1-2 LPM |
An amalgamation of compressed water and air, our Dry Fogger System generates fine water droplets, size of which ranges from 5 to 10 microns. Our products are very useful in controlling dust generated in loading, unloading, crushing and conveyor system. These products are available in various material, such as SS-304, brass and gun metal.
Additional Information:
- Packaging Details: BOX